EN
RISHBIN CO., LTD

Analysis Main Reasons for Abrasions of Steel Sitting Machine

In the slittingprocess, if the steel coil is carried out in a relaxed state, the internal layers of the steel coil will slide. This will lead to various abrasions on the surface of the steel, as well as scratches caused by repeated friction.

In fact, during the operation of steel slitting equipment, even the normal coiling of the steel coil, in the case of the normal tension will also produce abrasions. According to the analysis of production experience, it mainly includes the following three situations:

First,abrasion caused by the unreasonable setting of decoiler.
It mainly includes the following situations: during the operation of the slitter machine, when the tension of the decoiler exceeds the tension of the base material coil, or when the brake of the decoiler is insufficient, or when the pressure of the decoiler check roller is insufficient, the steel coil will relax and cause abrasion.

In addition, coiling of loose steel coils will be re-tensioned when uncoiling, resulting in abrasion. Once the decoiler tension is too large, the steel plate is pulled loose when suddenly rolled tight, will also produce abrasions. Therefore, measures should be taken to reduce the braking force when the work is done.

Second,abrasion caused by improper coiling machine settings. Loose coils are easy to occur in the process of starting up after the slitting unit stops. Abrasion can be caused by the relaxation of the shear outer ring and the transverse dislocation of the steel coil when uncoiling. In addition, coil abrasion will occur when the steel coil is inserted into the core of the loose shear and rewound.

A third condition is the coiling caused by hand expander. When the loose coil is rolled under the condition of insufficient tension of the dividing machine, and the expansion and contraction device is tensioned by hand, the abrasion will be caused by dislocation. In addition, abrasion will occur when the sliding inner steel band lateral swing or overlap.

Rishbin is a steel slitting machine manufacturer, as well it's a friend to all the customers. Welcome to share your operation experiences and problems with us, and we would love to offer proper solutions.

  • Use Regulations of Sectional Machine Processing Equipment

    Use Regulations of Sectional Machine Processing Equipment

    August 13, 2018Jinzheng Machinery, Which is well-known as metal processing equipment manufacturers in the world, is an national high-tech enterprises. Our company specializes in the R & D and production of sheet...view
  • Production Line of Cold Plate Longitudinal Shear Strip Unit

    Production Line of Cold Plate Longitudinal Shear Strip Unit

    November 1, 2018The cold plate longitudinal cutting unit production line is mainly aimed at the slitting processing equipment designed for the cold rolled plate. If customers have special requirements, the technical ...view
  • Copper Strip Slitting Machine Introduction

    Copper Strip Slitting Machine Introduction

    August 21, 2018As the earliest domestic specialized manufacturer of metal (stainless steel, iron coil, aluminum coil, etc.) slitting machine, cross cutting machine, slitting machine and other equipment production li...view
  • The Importance of Tension Controller to Slitter

    The Importance of Tension Controller to Slitter

    May 14, 2018Tension is one of the most important technical index in the operation of slitter, which will be involved in the unwinding and winding of the equipment. In order to control the tension of the slitter b...view
  • Five Steps of Aluminum Strip Production

    Five Steps of Aluminum Strip Production

    April 4, 2019Aluminum sheet and strip refers to the aluminium sheet or strip which is made of aluminium as the main raw material and mixed with other alloy elements. Aluminum sheet and strip is an important basic ...view
  • Hydraulic, Pneumatic And Lubricating System

    Hydraulic, Pneumatic And Lubricating System

    May 14, 2018This production line has a set of hydraulic stations, it is specially designed for HJ-2*1000-00 leveling units, which can meet the requirements of every unit in the production line.The hydraulic valve...view