EN
RISHBIN CO., LTD

Slitting machine Basic Overview

Slitting line machine , also known as disc shear, slitting machine, precision slitting machine, metal slitting machine, is a general term for the metal processing industry.
Slitting is applied to slitting and slitting of sheet metal materials. Then, the slitted strip is re-wound into a roll.
2. The advantages of the product
It has the advantages of convenient operation and use, high cutting accuracy, high material utilization, and speed control.
3. Composition structure
It consists of unwinding (unwinding), positioning of slicing material, slitting slits, and coiling (winding).
4. The applicable materials
Titanium alloy, titanium, tinplate, silicon steel sheet, aluminum tape, copper, stainless steel plate, galvanized sheet and many other metal materials.
5. Industry widely used products
Transformers, motors, home appliances, automobiles, building materials, packaging, hardware, etc.
Slitting line machine main components:
1. feeding car
2. unwinding machine
3. feeding device
4. traction leveling machine
5. hydraulic shears
6. Live Loop Bridge
7. side guide
8. automatic slitting machine
9. waste edge winding machine
10. shelf
11. Looper Bridge
12. Pre-distribution device
13. tension station
14. feeding device
15. split roll shearer
16. steering roller
17. rear axle
18. winding machine
19. out of the car
20. auxiliary support
21. hydraulic system
22. electrical system
6. Slitting machine type
(1) According to the thickness of the slitting plate, it can be divided into thin plate slitting line (processing thickness 0.1-3.0mm) and thick plate slitting line (processing thickness 3.0-6.0Mm).
(2) In accordance with slitting strip metal material, it can be divided into copper strip slitting line, stainless steel slitting strip, cold strip slitting strip, silicon steel slitting strip, tinplate slitting slitter Aluminum strip slitting line
(3) According to the degree of automation, it can be divided into automatic slitting line, semi-automatic slitting line.
  • The Importance of Tension Controller to Slitter

    The Importance of Tension Controller to Slitter

    May 14, 2018Tension is one of the most important technical index in the operation of slitter, which will be involved in the unwinding and winding of the equipment. In order to control the tension of the slitter b...view
  • Common Faults and Analysis of CNC Lathes

    Common Faults and Analysis of CNC Lathes

    August 29, 2018The simple CNC lathe is a more complex machine-electric integration equipment. Therefore, in the event of a failure, it needs to be comprehensively analyzed from the mechanical structure and electrica...view
  • Future Trend of Steel Slitting Line

    Future Trend of Steel Slitting Line

    November 22, 2018Now the steel slitting line is becoming more and more popular, so you must know the relevant knowledge. The conveyor adopts the anti-static driving rubber wheel with concentricity and roundness <0....view
  • Analysis Main Reasons for Abrasions of Steel Sitting Machine

    Analysis Main Reasons for Abrasions of Steel Sitting Machine

    November 22, 2018In the slittingprocess, if the steel coil is carried out in a relaxed state, the internal layers of the steel coil will slide. This will lead to various abrasions on the surface of the steel, as well ...view
  • Metal Slitter Hydraulic Tension Station

    Metal Slitter Hydraulic Tension Station

    September 3, 2018What is a tension station?There are many kinds of tension stations. The basic principles are the same in all walks of life, but their design and production will be different due to the different plate...view
  • NC Profiler Introduction and Operation Precautions

    NC Profiler Introduction and Operation Precautions

    August 29, 2018The numerically controlled cross shear machine can also be called a small-scale CNC shearing machine, and the English name is CNC horizontal shear machine equipment. CNC cross shears are classified cr...view