info@steelslitter.com +86-18626315075
EN
RISHBIN CO., LTD
  • Light Gauge Cut To Length Lines
    Light Gauge Cut To Length Lines When you are running prepaint, galvanized, or hot roll material, RISHBIN produces a complete line of Coil Processing Equipment that offers practical solutions to meet today’s most demanding requirements. Our Cut-To-Length / Blanking Lines are packed with useful timesaving features that really make a difference. We offer a wide variety of options that allow you to custom configure a line to meet your specific requirements. Together we can design a Cut-To-Length Line or a Blanking Line that will make your job easier, cut costs, and increase your profits. RISHBIN specialty is light gauge lines designed specifically for clients who want to process their own sheets in house. We will customize your equipment to meet your specific needs.
     Details Email
  • Medium Gauge Cut To Length Lines
    Medium Gauge Cut To Length Lines Medium Gauge Cut To Length Lines are applicable to coils of various specifications. According to different thickness and running speed, they could be designed to Stop-Go CTL and Looping CTL. Looping cut-to-length lines are designed so that the material is accumulated in a loop while the shear performs a cut to allow for cutting material without stopping the feed. These machines are a more cost effective method of continuous strip processing than a flying shear but require a pit or overhead clearance to allow for considerable accumulation.  Details Email
  • Heavy Gauge Cut To Length Lines
    Heavy Gauge Cut To Length Lines The heavy gauge cut to length line is designed for material thicknesses larger than 12.7 mm. By alternating between corrective leveling and plate flatteners, a wide range of input thicknesses can be accommodated. Heavy gauge lines utilize large scale mechanical or hydraulic shears for cutting material, also known as Stop Start CTL. With heavy duty stacking sections allow for handling bundles of cut plates. Due to the increase of thickness of the material, a more robust peeling and material handling section is used.  Heavy gauge lines are also useful for the processing of exotic alloys with higher shear strength ratings. Details Email
  • Rotary Shear Cut To Length Lines
    Rotary Shear Cut To Length Lines RISHBIN Rotary Shear Cut To Length Lines are very high production capacity lines. They are mostly used for cutting short pieces of thin metal sheets (less than 3mm), with max. 150 cutting times per minute, running line speed is up to 80 meters per minute. It’s very fast and continuous cutting process. Compared with stop shear Cut to Length line, the rotary shear line can achieve cutting the plates without stop the feeding, higher speed, better accuracy and surface protection. 
     Details Email